Job Site Signs That
Survive the Build.
Site boards, fence banners, hoarding graphics, and trade signs for Ottawa builders and contractors. Print the size and wording you supply on materials that hold up through a full build season.
Signage for every stage of the build.
Large-format boards naming the builder, architect, and trades on the lot. Sized for post mounting or attaching straight to a hoarding wall.
Mesh or vinyl banners that zip-tie along temporary fencing. Wind-mesh options let gusts pass through instead of tearing the panel off.
Roofing, HVAC, framing, and excavation crews each get their own branded panel. Reorder the same artwork as your crews move between lots.
Coroplast for short jobs, aluminum composite or PVC when a sign stays up through a longer build. We'll match the material to how long it needs to last.
Leave the address off and the same board follows your crew from lot to lot. Add a swappable panel or magnet when only the details change.
Send the notice text, contact details, or permit information you need shown and we set it to print. Confirm any site or City requirements on your end.
Build the sign around the site.
- ✓Coroplast, PVC, or aluminum composite
- ✓Mesh banners for fence and hoarding runs
- ✓Custom sizes for post or panel mounting
- ✓Grommets, zip ties, or drilled mount holes
- ✓High-visibility colour and reflective options
- ✓Single or double-sided printing
- ✓Matching sets for multiple trades
- ✓Bulk runs for multi-lot developments
Who we print site signage for.
- General contractors
- Home builders
- Roofing companies
- Excavation crews
- Renovation firms
- Property developers
- Landscaping contractors
- Trade subcontractors
From artwork to the fence line.
- 1Send your artwork & details
Share your logo, the wording the sign needs to carry, and where it's going — fence, post, or hoarding wall.
- 2Approve a free mockup
We lay it out so it reads from the road, then send a proof and an exact quote before anything prints.
- 3We produce your signs
Printed and finished in our Ottawa shop on the material you picked, with the mounting hardware or grommets you need.
- 4Pickup or delivery
Pick them up ready to mount, or we deliver to the office or straight to the site across the Ottawa region.
Send whatever you have — we'll get it print-ready.
A vector file (AI, EPS, PDF or SVG) or a high-resolution PNG works best, but a rough logo is fine to start — we'll tell you exactly what we need. Not sure if your file will print sharp? Read PNG vs vector for printing and how to prepare your logo files, or let our logo vectorization service redraw it for you.
What it costs
Your price depends on quantity, product, colours, and how many print or stitch locations you need — bigger runs cost less per piece.
Get exact pricingHow fast
Most orders move as soon as you approve the mockup. Got a hard deadline? Tell us up front and we'll tell you honestly what's possible — rush options are often available.
Ask about your deadlineSee it before you pay — free mockup.
Send your logo and quantity and we'll send back a digital mockup and an exact price. No deposit to see it.
Construction Signs across Ottawa & the National Capital Region
We're a real Ottawa shop with local pickup, delivery, and same-day quotes across the National Capital Region. Find your neighbourhood:
Frequently asked questions
What material should a construction sign be?
It depends on how long the sign needs to stay up. Coroplast is the light, low-cost pick for a short job, PVC holds a flatter face over a longer stretch, and aluminum composite is the sturdiest option for a board that lives on a site through an entire build. Tell us the expected duration and we'll recommend the material.
Can you print a banner that attaches to site fencing?
Yes. Fence and hoarding banners are one of the most common things we print for Ottawa job sites. We add grommets along the edges so the banner zip-ties to temporary fencing, and mesh is worth considering on exposed lots because wind passes through the material instead of pulling on the panel.
Does my sign need specific wording or permits?
We print the size and wording you supply — we don't determine what your site is required to display. Requirements can vary by project type, zoning, and property, so confirm anything mandatory with the City of Ottawa or your project manager first, then send us that final text and we'll set it to print.
Can one sign work across several job sites?
Yes, and it's a common way to get more out of one print. Leave the street address and project-specific details off the main board and it can move with your crew. If the details do change between lots, we can print a smaller swappable panel that mounts over the main sign.
Do you print signs for each trade on a project?
We do. Builders often order a matching set — one panel per subcontractor — so the whole hoarding reads as one coordinated wall rather than mismatched signs. Send the logos for each trade and we'll lay them out on a shared template.
How much do construction signs cost?
Price comes down to the material, size, quantity, and whether you need mounting hardware. Larger runs bring the per-sign cost down, so a multi-lot development is cheaper per board than a single one-off. Send your sizes and quantity for an exact quote.
Related services
Embroidered logo toques & beanies for teams, staff, and winter promos.
Learn moreEmbroidered & printed aprons for restaurants, cafes, salons, and makers.
Learn morePrinted cotton & canvas totes for shops, events, and promotions.
Learn moreEmbroidered softshells, fleece & work jackets built for Canadian winters.
Learn moreReady to start?
Tell us what you need and we'll send a free mockup and quote — usually the same business day.