Event Signage: Sponsor Banners and Wayfinding
Plan event signage zone by zone: entrance banners, wayfinding and directional signs, sponsor banners, stage banners and how many of each a big event needs.
- Signage zones
- A big event's signs fall into six zones: arrival and entrance, registration, wayfinding and directional signs, sponsor recognition, stage and photo wall, and volunteer and staff tees.
- Vinyl banner sizes
- 2′ × 4′, 2′ × 6′, 3′ × 6′, 3′ × 8′, 4′ × 8′ and 4′ × 10′, in 13oz scrim vinyl hemmed with grommets every 24″, or 15oz blockout vinyl for double-sided banners. Online preset runs of 1–25.
- Directional signs
- 4mm coroplast in 16″ × 24″, 18″ × 24″, 24″ × 36″ or any custom size up to 48″ × 96″, single or double-sided, in online preset runs of 1–500. Indoors: 3/16″ foam boards from 11″ × 17″ to 24″ × 36″.
- Flags and pull-ups
- Feather flags in 7.5, 10, 13 and 15.5 ft; retractable banners in 33″ × 81″ and 48″ × 80.5″; online preset runs of 1–5 of each.
- Turnaround
- 5–7 business days on every print product, then shipped across Canada at a price for your postal code, or delivered locally across Ottawa–Gatineau. The studio shows the estimated ship date before you pay.
- Bulk orders
- Dozens of banners and hundreds of signs are quoted directly through the free quote form, by phone at 613-666-YAYA (613-666-9292) or by email at order@yayaprints.ca, with the same proof and human designer check as a single sign.
What event signage does a big event need?
A big event needs signs in six zones, and each zone answers one question a guest is asking at that moment: is this the place, where do I check in, which way is Hall C, who made this possible, what is happening on stage, and who can I ask. Plan the signs zone by zone and nothing gets forgotten. Tap a zone to jump to its card.
Arrival
Check-in
Getting around
Recognition and stage
Every zone can be ordered in the online studio; runs of dozens of banners or hundreds of signs are quoted directly.
Quick picks: what kind of event is it?
Conference or summit
Outdoor festival
Fun run or charity walk
Trade show or expo
Gala or awards night
Market or community fair

Event signage zone by zone
Each card below is one zone: what goes there, the sizes and materials we print it in, and where it earns its keep.
Arrival and entrance: feather flags and large banners
Feather flags 7.5, 10, 13 or 15.5 ft · vinyl banners up to 4′ × 10′
Arrival signs answer one question from far away: is this the place? Feather flags do that job best because they are tall and they move. Line them along the road, the parking lot or the path to the gate. The feather flag studio offers 7.5, 10, 13 and 15.5 ft flags on a lightweight pole kit, single-sided or double-sided with a block-out liner. Keep words 2″ in from every edge, where the pole sleeve and the hem sit, and plan how each flag will be anchored on grass or pavement.
The gate itself gets the largest banner, up to 4′ × 10′: the event name, the dates and one word, such as “Entrance” or “Registration”, with an arrow. Banners are hemmed with grommets every 24″ so they tie to fencing, scaffolding or a frame.
Registration: tablecloth, retractable banner, foam-board agenda
Tablecloth 90″ × 132″ · pull-up 33″ × 81″ or 48″ × 80.5″ · foam board up to 24″ × 36″
Registration is where lines form, so it needs to be found from across the lobby. Cover each check-in table with a custom tablecloth with your logo, a 90″ × 132″ throw that reaches the floor on a 6-ft table and hides the boxes underneath. Stand a retractable banner (33″ × 81″ or 48″ × 80.5″) behind or beside the desk, where people in the line can read it over the heads in front of them.
Then answer the next question before anyone asks it: a foam board (11″ × 17″ up to 24″ × 36″, 3/16″ thick) with the agenda, the Wi-Fi name or “Last names A–L / M–Z”. On the pull-up, keep the bottom 4″ clear: it rolls down into the stand.
Wayfinding and directional signs
Outdoors: 4mm coroplast, 1–500 online · indoors: foam boards and posters
Outdoors, use coroplast: 4mm corrugated plastic, made for outdoor signs, in 16″ × 24″, 18″ × 24″, 24″ × 36″ or any custom size from 12″ up to one 48″ × 96″ sheet. Double-sided signs read from both directions of travel, and the studio’s preset runs go up to 500. They zip-tie to fencing, barricades and posts.
Indoors, foam boards on the venue’s easels or posters on walls and doors do the same job without the weather. Whatever the material, every sign carries one destination and one arrow, in the same colours and wording as the map and the programme.
Volunteer and staff tees
One bright colour · role on the back · clothing 1–2 weeks
The most useful sign at a busy event is a person who can answer a question. Put every volunteer in one colour nobody else is wearing, with “Volunteer” or “Ask me” on the back, where a crowd can see it.
Clothing runs on its own schedule, 1–2 weeks standard, with studio price breaks at 12, 24, 50 and 100 pieces. Our guide to custom event shirts covers volunteer, participant and sponsor tees.
4′ × 10′
Largest vinyl banner
1–500
Coroplast signs in the online studio
24″
Grommet spacing on banners
5–7
Business days to print
How many signs does a 500, 2,000 or 10,000-person event need?
Count decision points, not people: every gate, door, fork and turn where a guest has to choose a direction gets a sign. The table below is a starting plan to adjust to your site and floor plan, not a rule. A compact indoor conference for 2,000 may need fewer directional signs than a spread-out festival for 500.
| Zone | About 500 people | About 2,000 people | About 10,000 people |
|---|---|---|---|
| Arrival | 1 banner (4′ × 8′), 2 feather flags | 1 banner (4′ × 10′) per entrance, 4 feather flags | 1 banner (4′ × 10′) and 2 feather flags per gate |
| Registration | 1–2 tablecloths, 1 retractable banner, 1 foam-board agenda | 3–4 tablecloths, 2 retractable banners, 2–3 foam boards | 1 tablecloth per check-in or info table, 1 retractable banner per desk, a site map at every gate |
| Directional signs | 10–20 | 30–60 | 100–300, mostly double-sided coroplast |
| Sponsor banners | 1 title banner and 1 shared sponsor board | 4–8, sized by tier | 10–30 on fences, double-sided where seen both ways |
| Stage and photo wall | 1 banner (4′ × 8′) | 1–2 banners (4′ × 10′) | 1–2 banners (4′ × 10′) per stage |
| Volunteer tees | One per volunteer and staff member, plus a few spares in the common sizes | ||
The quickest way to a real count is a walk-through. Take the floor plan or the site map, walk the route a first-time guest would take from the parking lot, and mark a dot everywhere you would hesitate. Each dot is a sign; each dot seen from two directions is a double-sided sign.

How do you make wayfinding signs people can read?
Use big, high-contrast arrows and short words: one destination and one arrow per sign, light on dark or dark on light, and the same names and colours on every sign. Wayfinding signage is the whole system that helps people find their way, from the site map to the room signs; directional signs are the arrows inside it.
Short words. “Hall C”, “Washrooms”, “Exit”. A guest walking past reads a word or two, not a sentence. Use exactly the names in the programme and the app: if the schedule says “Hall C”, no sign should say “Ballroom C”.
Big arrows, high contrast. Make the arrow the largest thing on the sign. Keep sponsor logos off directional signs or small at the bottom, and avoid photos behind the words.
Place them before the turn. Put a sign where the choice is made, and a second one just after the turn to confirm the guest is on the right path.
Mind the back of double-sided signs. A guest on the other side of the sign sees the world mirrored, so the arrow on the back usually points the other way. Check both sides on the proof.

In Ottawa, many events sign in both English and French. Put both languages on the same sign, in the same order on every sign, so guests learn where to look.
When should you order event signage?
Count back from the event: lock the sponsor list about four weeks out, finish the artwork by three weeks, approve the proof, allow 5–7 business days to print, then shipping and a day to install. The step that slips is almost always the sponsor list, so give sponsors a logo deadline in their contract.
- Lock the sponsor list and collect vector logos.
- Write the sign list: every sign, its size, its wording and which way its arrow points.
- Build the artwork from one template, so every sign shares the same colours and type.
- Approve the proof. A human designer checks every file and tells you if something is off; nothing prints until you approve.
- Print: 5–7 business days, then shipped. The studio shows the estimated ship date before you pay.
- Install the day before and walk the route once more as a first-time guest.
Festival and conference organisers are already planning the 2027 season, and festival signage is easiest to plan before the sponsor calls start. In Ottawa, the Ottawa Festival Network holds its Ottawa Festival Summit on November 25, 2026, at the RA Centre. A sign plan drafted over the winter means the spring order is a reprint with new dates, not a fresh design. For indoor shows, our trade show printing checklist covers the booth side of the same schedule.
Ordering event signage in bulk
Big runs are our focus. The online studio’s preset runs go up to 25 vinyl banners, 500 coroplast signs and 5 feather flags, retractable banners or tablecloths, and the price per piece falls as the quantity rises. Beyond that, a festival’s worth of signs is quoted directly through the free quote form, by phone at 613-666-YAYA (613-666-9292) or by email at order@yayaprints.ca, with the same proof and human designer check as a single sign.
The easiest bulk order is a spreadsheet: one row per sign, with the size, the wording, the arrow direction and the quantity. For booths, pull-ups and tablecloths at the same event, see our trade show displays. We ship across Canada, priced for your postal code at checkout, deliver locally across Ottawa–Gatineau, and work in English and French.
Frequently asked questions
What signs do you need for an event?
A big event needs signs in six zones: arrival (feather flags and a large vinyl banner), registration (a tablecloth, a retractable banner and a foam-board agenda), wayfinding (coroplast arrow signs outdoors, foam boards and posters indoors), sponsor banners sized by tier, a 4′ × 8′ or 4′ × 10′ stage banner, and volunteer and staff tees.
What size should a sponsor banner be?
Size it by tier. A title sponsor usually gets a 4′ × 10′ or 4′ × 8′ banner at the stage or main gate, major sponsors 3′ × 8′ or 3′ × 6′, supporting sponsors 2′ × 6′ or 2′ × 4′, and community sponsors share one 4′ × 8′ banner or a 24″ × 36″ foam board. Fence banners seen from both sides should be double-sided blockout vinyl.
What is the difference between wayfinding signs and directional signs?
Wayfinding is the whole system that helps people find their way: site maps, directional signs, room and area signs, and confirmation signs after a turn. Directional signs are the arrow signs within that system, placed at every point where a guest has to choose a direction.
How many directional signs does an event need?
Count decision points, not people: one sign at every gate, door, fork and turn, plus a confirmation sign after each turn. As a starting plan to adjust, a 500-person event often needs 10–20 directional signs, a 2,000-person event 30–60, and a 10,000-person festival 100–300, mostly double-sided coroplast.
How far ahead should you order event signage?
Start about four weeks out: lock the sponsor list and logos, finish the artwork by three weeks, approve the proof, then allow 5–7 business days to print plus shipping, and install the day before. YAYA Prints shows the estimated ship date before you pay.
Can you print bilingual English and French event signs?
Yes. Any sign can carry both languages, and YAYA Prints works with customers in English and French. Keep both languages on the same sign, in the same order on every sign, with one arrow per sign.
Design it yourself. A human designer still checks every order.
Our free studio gives you the price and the mockup in the browser. What it doesn't do is print your file blindly — every order is reviewed by a real designer before it reaches the press.
- Step 1You design it — free
Upload your logo, drop it on a real garment, set the size and placement, pick colours and quantities. No account, no deposit, no waiting on a reply.
- Step 2A human designer checks it
Before anything prints, one of our designers opens your file and checks resolution, colours, sizing and placement. If it won't print well, we fix it or tell you exactly what's wrong — a person, not an automated preflight.
- Step 3You approve, then we print
You get the corrected mockup back on the actual product. Nothing goes to press until you say yes — then it's ready in 1–2 weeks, or in 1–3 business days with a rush.
Get every sign for the event from one shop
Banners, feather flags, retractable banners, coroplast directional signs and tablecloths, printed in 5–7 business days with a proof and a designer check. Dozens or hundreds of signs are quoted directly.
Every order is reviewed by a human designer before it goes to press. A person checks artwork resolution, colour, sizing and placement, and either fixes the file or tells the customer what is wrong — it is not an automated preflight.